Tear-resistant paper. Ideal for tear-resistant hang tags and indexes. Increased strength thanks to dimensionally stable and thermostable polyester film core.
ENDURO Classic Plus 225 G is a hard-wearing composite material consisting of a 50 µm PET film core and white, natural satin-finished paper surfaces. The three-layer product structure is robust, resistant to edge tearing, water impermeable and suitable for certain outdoor applications. It can be cut, punched, perforated, drilled, embossed, scored, folded, glued and bound without issue.
The super-calendered, extra-smooth paper surfaces offer optimized feed properties and printing results. Thanks to the highly absorbent surfaces, all common standard inks and varnishes can be used in offset and flexo printing. Suitable for laser printing and variable thermal transfer and dot matrix printing. With excellent drying and ink/toner adhesion, ink drying and toner adhesion. Can be stamped easily and lettered manually.
Thanks to the multi-layer product structure ENDURO offers an affordable, eco-friendly and sustainable alternative to fully synthetic media. It is PVC-free and FSC®-certified.
At a glance
- Increased tear resistance
- High product stability and rigidity
- Water impermeable
- Excellent printability
NameWeight [g/m²]Value218Tolerance±12NormISO 536NameThickness (total) [µm]Value185Tolerance±12NormISO 534NameBending stiffness MD [mN]Value> 750ToleranceNormISO 2493-1; 15°/10mmNameBending stiffness CD [mN]Value> 300ToleranceNormISO 2493-1; 15°/10mmNameTensile strength MD [N/15mm]Value> 200ToleranceNormISO 1924-3/2/300NameTensile strength CD [N/15mm]Value> 100ToleranceNormISO 1924-3/2/300NameISO Brightness, front side [%]Value> 90ToleranceNormISO 2470-1NameISO Brightness, reverse side [%]Value> 90ToleranceNormISO 2470-1NameWhiteness, CIE, D65/10°, front sideValue> 110ToleranceNormISO 11475NameWhiteness, CIE, D65/10°, reverse sideValue> 110ToleranceNormISO 11475NameOpacity [%]Value> 93ToleranceNormISO 2471
For quality reasons ENDURO should be stored originally packed. Storage & converting conditions of 20±5°C and 50±10% rel. humidity are recommended.
Please inform us whenever intended use is linked to food contact.
It may be possible to provide a Declaration of Compliance confirming material suitability for your specific application.
According to our experience, the majority of the paper fibres (67% of the total composite) of ENDURO Classic Plus 225 G can be recovered in the paper recycling process. The film is separated and can be used for thermal energy recovery. When sorted using near-infrared sensors (NIR), however, this product is not identified as paper.
Therefore, it should be targeted for paper recycling as commercial waste. It is classified as “Mixed waste paper, grade 5.01” according to EN 643.
Smaller quantities can be disposed of together with household waste.
As conversion (i.e. printing) may significantly change the characteristics of a product, these recycling recommendations may only apply to ENDURO material before processing.
Originally packed under recommended storage conditions ENDURO rolls and sheets can be stored for at least 3 years.
Detailed recommendations for printing and processing of ENDURO can be found under Download.