ENDURO MD Shield 245

  • Products
  • Current site: ENDURO MD Shield 245

ENDURO MD SHIELD 245 is a robust tear-resistant paper-based product with an aluminum core.
It will be detected in metal-detectors. it will protect RFID chip information.

It is used as a loop-lock tag or hang tags in the food processing industry.
Converted to pocket or sleeve, it will protect any RFID-document such as credit card, ID-card or biometric passport from unallowed reading and data capture.

ENDURO MD Shield 245 can be cut, punched, perforated, drilled, folded, glued and bound without issue.

Its high-quality paper surface offers optimized feed properties and printing results and can be printed with all common standard inks and coatings in offset and flexo printing. It is suitable for variable thermal transfer printing.

It is PVC-free and FSC®-certified. An affordable and sustainable alternative to synthetic products.

  • At a glance

    Advantages

    • Metal detectable
    • Declaration of Compliance for food contact possible
    • Increased tear resistance
    • High product stability and rigidity
    • Temperature resistance 250°C / 15 Min.

    Certificates

    FSC

    Applications

    Loop tags Hang tags
  • Physical data
    Name
    Value
    Tolerance
    Norm
    Name
    Weight [g/m²]
    Value
    240
    Tolerance
    ±12
    Norm
    ISO 536
    Name
    Thickness (total) [µm]
    Value
    235
    Tolerance
    ±10
    Norm
    ISO 534
    Name
    Bending stiffness MD [mN]
    Value
    >1000
    Tolerance
    Norm
    ISO 2493-1; 15°/10mm
    Name
    Bending stiffness CD [mN]
    Value
    >400
    Tolerance
    Norm
    ISO 2493-1; 15°/10mm
    Name
    Tensile strength MD [N/15mm]
    Value
    >200
    Tolerance
    Norm
    ISO 1924-3/2/300
    Name
    Tensile strength CD [N/15mm]
    Value
    >150
    Tolerance
    Norm
    ISO 1924-3/2/300
    Name
    Opacity [%]
    Value
    >99
    Tolerance
    Norm
    ISO 2471
    Name
    ISO Brightness, front side [%]
    Value
    >85
    Tolerance
    Norm
    ISO 2470-1
    Name
    ISO Brightness, reverse side [%]
    Value
    >85
    Tolerance
    Norm
    ISO 2470-1
    Name
    Whiteness, CIE, D65/10°, front side
    Value
    >125
    Tolerance
    Norm
    ISO 11475
    Name
    Whiteness, CIE, D65/10°, reverse side
    Value
    >125
    Tolerance
    Norm
    ISO 11475
  • Instructions

    General tips

    For quality reasons ENDURO should be stored originally packed. Storage & converting conditions of 20±5°C and 50±10% rel. humidity are recommended.

    Food contact
    Please inform us whenever intended use is linked to food contact.
    It may be possible to provide a Declaration of Compliance confirming material suitability for your specific application.

    Waste disposal
    According to our experience, the majority of the paper fibres (67% of the total composite) of ENDURO Effect 245 Metal detectable can be recovered in the paper recycling process. The film is separated and can be used for thermal energy recovery. When sorted using near-infrared sensors (NIR), however, this product is not identified as paper.
    Therefore, it should be targeted for paper recycling as commercial waste. It is classified as “Mixed waste paper, grade 5.01” according to EN 643.
    Smaller quantities can be disposed of together with household waste.
    As conversion (i.e. printing) may significantly change the characteristics of a product, these recycling recommendations may only apply to ENDURO material before processing.

    Durability

    Originally packed under recommended storage conditions ENDURO rolls and sheets can be stored for at least 3 years.

    Printing instructions

    Detailed recommendations for printing and processing of ENDURO can be found under Download.

  • Downloads

    Files

Datasheet
We will advise you personally:

Customer Service +49 2421 5970